Product details
1. Introduction AQUCELL Air & Water Mixture Technology mainly applied in High turbidity inorganic waste water, such as SiC waste water, surface water without media filtration ,bullet trains filter wool cleaning waste water and other inorganic grinded waste water etc. It has been applied in plenty of project sites and obtained multiple National patent in China.
2.Inner StructureEach hollow fiber at the bottom end are sealed / hollow fiber at the top with double-layer potting
3.Operation Features 1) High cross-flow, reduce contaminants fouling the hollow fiber
2) Air & Water Mixture UF Membrane adopted "Air & Water Mixture operation mode", aeration at the same time of produce water. Through the turbulent effect of air & water mixture, the contaminants that formed at the membrane surface during filtration can be washed away easily, which can avoid hollow fiber stuck and water flux reduction.
3) Aeration Frequency and duration time depends on water condition, it can reach reasonable, low energy consumption operation condition.
4.Production---AQU-D0858
Performance Parameter |
Product Water Flowrate : |
0.31 - 1.71 m³/H
|
*Product Water Turbidity: |
<0.2 NTU
|
Log Reduction Rate of Microorganisms, Virus:
|
99.99% |
Module |
Structure :
|
Hollow Fiber UF Membrane Module |
Membrane Material :
|
Modified PVC
|
Active Membrane Area :
|
31 m²
|
Dimension :
|
0.9mm/1.6mm
|
Pore Size :
|
0.01um
|
Module Size : |
Φ200 x 1480mm |
Operating Limits |
Flux : |
10 - 55 L/H
|
Max. Feed Pressure : |
0.3 Mpa
|
Max. TMP : |
0.2Mpa
|
Chlorine Tolerance, Continuous Operation :
|
100ppm
|
Chlorine Tolerance, Short-Term Cleaning :
|
200ppm
|
Temperature Range :
|
5ºC-45ºC
|
PH Range of Feed Water :
|
2-12 |
Operation Mode :
|
Outside-To-Inside
|
5.Application