Water Treatment Equipment Disc Filter for Irrigarion

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Guangdong

  • Validity to:

    Long-term effective

  • Last update:

    2017-09-30 19:56

  • Browse the number:

    110

Send an inquiries

Company Profile

Guangzhou Poolking Swimming Pool Equipment Manufacturing Co., Ltd.

By certification [File Integrity]

Contact:Mrs. Maggie Chan(Mr.)  

Email:

Telephone:

Phone:

Area:Guangdong

Address:Guangdong

Website: http://jm020com.hzyjmx.com/

Product details
Water filter disc  introduction: >> Ports : inlet 3" victaulic outlet: 3" victaulic
>> Dimension: mm cover diameter:¢230 unit height:840 maximum width:265
>> Unit net weight: 9.4 Kg
>> Material: High performance reinforced engineering plastic
>> Optional filter discs:green 50μ, red 100μ, yellow 200μ,
>> Working pressure:0.2 ~ 0.8MPA
>> Backwashing pressure: 0.15~0.8MPa
 Automatic Stainless Steel water filter disc filter for irrigation  Disc filter: Jieming firstly introduced disc filtration technology into Chinese market, over the years this technology has been developed and widely applied. The disc cartridge is made up of a volume of discs with both sides being grooved, intersections are formed by groove edges can intercept the solid particles contained in the water, because of its mesh and deep filtration, it greatly enhances the filtration effect. Meanwhile, the disc filter has the characteristics of efficient backwash, automatic continuous operation, low water consumption, less footprint and reliable operation, the filtration system's backwash process is alternate, service and backwash cycles shift automatically, to ensure continuous water, low system pressure loss, therefore, the advantages of disc filter technology are very clear.
Jieming Co.Ltd now combines years of experience, improves and enhances traditional technology, has developed new series disc filter system that has own intellectual property right.
Improve and enhance traditional disc filter
1. Use many patented technologies, much safer, high efficiency, save water, save space and less routine maintenance for installation and application.
2. Filter cartridge design without spring, while in filtration, the inlet water pressure compact the set of discs by the diaphragm device automatically,thus pressure required for backwash is decreased greatly.
3. Unique build-in duckbill valve, ensures the maximum water capacity during filtration process, as well as has greater backflow check valve function while backwash process.
4. Split assembled filter cartridge structure, is flexible to change filter cartridge height as design required, thus adjust filtration area, and meet different system matching requirement.
5. Give up conventional metal clamp design, filter unit with self-locking buckle and specially designed seal ring, assembling and disassembling of the filter unit cover becomes very easy, good sealing effect.
6. Every filter unit has filtration and backwash process indicating devices and automatic air intake and air discharge devices, prevent water hammer damaging as well as improve filter cartridge backwash result.

disc filter Operation principle
disc filter Working process
Water flow from side inlets through the tangent direction to the filter cartridge, inlet water pressure within the chamber drives the diaphragm device that is above the cover, and the mandrel to downward press the disc sets, the disc sets compacted as a filter cartridge, since water impurities intercepted by the filter cartridge, water flow through the check valve locating in the bottom middle of cartridge to the outlet.
As the diaphragm press downward, the red indicator above the cover drop into the sulcule.
 
disc filterBackwashing process:
While in backwashing, side inlet becomes drain port, the diaphragm also looses previous downward pressure, meanwhile backwash source water comes from outlet port, because of the check valve, backwash water can only flow through four tubes with nozzles and push upward the filter cartridge cap and diaphragm device,loose the disc sets, meanwhile water flow out through the tangent line, discs rotate, the solid particles were washed out.
Due to the diaphragm device pushed up, the red indicator upper the cover is pushed out, it is easy to see and determine the inside filter cartridge process from outside.
While in backwashing, upper automatic air check valve will open automatically, air can come into the chamber, contributed to ejection and washing results improvement.
 

Disc filter unit specifications & disc filter filter unit flow rate Vs differential pressure curves

 

disc filtersystem
System working pressure: 0.2 ~ 0.8MPA; Backwashing pressure: 0.15~0.8MPa
Working temperature: <60ºC
PH:4-13
disc filterunit (A) quantity: 3-10
System backwash: use other unit's filtrated water to backwash one by one till completed.
Inlet pipe (B): stainless steel material, 6"- 8" flange;
Outlet pipe (C): stainless steel material, 6"- 8" flange ;
Drain (D): 3" flange
Backwash valve (E): plastic material, 3" victaulic
System controller (F): automatic dedicated controller, insulation class is international standard IP65;
Dimension and weight: refer to the drawing
For the situation of lower inlet water pressure, external backwash water resource JYF series or filtration system with a main valve available to choose.
 
disc filterModel selection
1. Raw water quality categories:
A. Good: municipal tap water, well water extracted from stable aquifer
B. General: cycle cooling water, surface water after sedimentation, effluent water after effective sedimentation and full biological treatment.
C. Poor: underground water extracted from poor quality aquifer, effluent water after effective sedimentation, none or seldom biological treatment, surface water with large quantity active microorganisms.
D. Very poor: dirty well water or well water containing high iron and manganese; surface water affected by flood and without sedimentation, drain water without sedimentation and biological treatment.
Different raw water has great effect on filter' operation cycle, generally choosing a system mold ensuring each filtration process can last more than an hour.
 
2.Filtration grade selection for disc filter:
selecting discs, it is significant for ensuring filter's application through the whole water treatment process, only if selecting discs correctly, post water quality requirement is met. The following table is recommended filtration grade for common application.
 
Filtration system application(Disc filter) Filtration grade selection
Drinking water pretreatment, various production process water, nozzle protection 50μ
Recycled water filtration, water supply pre treatment 100μ
Reclaimed water treatment, waste water treatment 200μ
 
Raw water quality, filtration grade and flow rate are the basis for choosing our filter system
Filter unit's flow rate refers to flow rate/pressure deviation curves.
disc filtermodel table
Raw water quality good General Poor Very poor
Grade 200μ 100μ 50μ 200μ 100μ 50μ 200μ 100μ 50μ 200μ 100μ 50μ
Filter model flow M3/H flow M3/H flow M3/H flow M3/H
JY2-3 75 60 42 57 45 33 40 30 22 24 19 13
JY2-4 100 80 56 76 60 44 54 40 30 32 26 18
JY2-5 125 100 60 95 75 55 67 50 37 40 32 22
JY3-3 ≤111 ≤90 ≤60 ≤84 ≤66 ≤48 ≤60 ≤45 ≤33 ≤36 ≤28 ≤19
JY3-4 148 120 80 112 88 64 80 60 44 48 37 26
JY3-5 185 150 100 140 110 80 100 75 55 60 47 32
JY3-6 222 180 120 168 132 96 120 90 66 75 56 39
JY3-7 259 210 140 196 154 112 140 105 77 84 66 45
JY3-8 296 240 160 224 176 128 160 120 88 96 75 52
JY3-9 333 270 180 252 198 144 180 135 99 108 85 58
JY3-10 370 300 200 280 210 160 200 150 110 120 94 65
 
Actual flow rate depend on pressure loss, above table is only for recommendation
 
Pictures of disc filter:



 
About us:
Guangzhou Jieming water Treatment Equipment Co., Ltd.is dedicated to the development of water treatment in Southeast Asia. We have adopted advanced water treatment technology in Europe and America for industrial water treatment, pure water, drinking water, ion exchange systems, reverse osmosis systems, ultrafiltration systems, and undertake all types of water treatment works.
We have our own factory to produce tank FRP, disc filter, reverse osmosis water treatment plant, multi valve system. We are also the agents of all kinds of water treatment components, such as Y pattern diaphragm valve, backwash valve, fleck valve, Runxin valve, Fobrite valve, FRP and stainless steel membrane housing, PVC bag filter, PVC cartridge filter, distributors, brine valve, brine tank, water tank...etc. You can achieve a one-stop purchase here, saving time, energy and money.
FAQ
1. Are you the manufacturer?
Yes, we have our team to make the disc filter.
 
2. How to package and ship them.
The best way is by sea, package please see above pictures.
 
3. What`s the payment terms?
Prepaid 30% BY T/T as the deposit, 70% the balance by T/T before delivery.
 
4. Can you arrange the shipping for us?
Of course we can.
 
5. Do you have other parts for water treatment?
Yes, other products please check our websites.
 
6. What other service can you offer?
Besides the technical support, we can also help you to collect other water treatment products, and ship all of your goods together.